NightForce ATACR 7-35x56mm F1 Riflescope w/ TReMoR3 Reticle and QD Mount

SKU: 560-055

NightForce ATACR 7-35x56mm F1 Riflescope w/ TReMoR3 Reticle and QD Mount

As shooters continue to push the limits of rifle and cartridge performance, Nightforce® continues to exceed the needed performance in riflescope technology by introducing the ATACR™ 7-35 x 56 F1. With its extensive magnification range and legendary ATACR™ optical performance, via an ED glass package, the ATACR™ 7-35 x 56 F1 will push the boundaries of even the most capable of today’s long range cartridges.

With parallax adjustment down to 10 meters and 100 MOA of elevation travel, precision is attainable from short range distances to as far as any modern extreme long range rifle and cartridge can reach. This riflescope offers an incredible field of view across the entire magnification range, making targets easy to find, identify and engage. Whether the need is for competition like the Precision Rifle Series (PRS), or extreme long range shooting, this riflescope delivers unmatched precision and repeatability.

Model: C571
Focal Plane: First
Magnification Range: 7-35x
Objective lens diameter: 56mm
Tube diameter: 34mm/1.34 in
Internal adjustment range (MOA/Mil):
    e: 100 MOA
    w: 60 MOA
    e: 27.3 Mil
    w: 18 Mil
Click value: .1 Mil-rad
Calibrated Ranging Power: N/A
Parallax adjustment: 10 m–∞
Exit pupil diameter:
    35x: 1.6mm
Eye relief 83-91mm/3.26-3.58 in
Field of view @100 yards/100 meters:
    7x: 14.97ft
    35x: 3.44ft
    7x: 4.6m
    35x: 1.05 m
Objective outer diameter: 65 mm
Eyepiece outer diameter: 44 mm
Overall length (inches/mm): 16.0 in/406 mm
Weight (ounces/grams): 39.3 oz/1113g
Mounting length (inches/mm): 6.5 in/165 mm
Front/Rear Mounting Length: 2.3 in/2.4 in
PTL (Power Throw Lever): Standard
Reticles available: TreMor3™
Illumination: Digillum
Elevation Feature: ZeroStop

About VFZ™ Mounts:
VFZ™ is a new theory in the concept of clamping accessories to MIL-STD-1913 rails. Instead of using a horizontal cross-bolt, the VFZ™ uses a vertical bolt that draws up a clamping foot against the lower angle of the rail, seating the mount similarly to a fully-closed LaRue lever. Once installed on the firearm, index marks allow the user to remove the mount, then reattach to the same tension, providing unprecedented return to zero for a non-QD-levered mount. The unique vertical alignment of the clamp allows components that are structurally stronger than traditional cross-bolt designs.

Why should I select VFZ™ Mounts instead of a QD Lever Mount?:
If you intend to leave an optic or accessory on a rail for the life of the rifle, the VFZ™ option is for you. The VFZ™ is intended as a longer-term, semi-permanent mounting alternative to our well-known Speed Levers. While both mounts will allow the user to remove the mount from the weapon, reinstall it in the same position, and return to zero, the VFZ™ mount is intended for users that will not need to constantly remove and install their mounts (especially in the field).

Post new Review

Please leave a star rating for your review.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Web page addresses and e-mail addresses turn into links automatically.

This question is for testing whether you are a human visitor and to prevent automated spam submissions.